Home About us Products Service Contact us
  
  wedge anchor
  sleeve anchor
  strike anchor
  Drop in anchor
  Shield anchor
  Lag shield anchor
  Spring toggle
  Hollow wall anchor
  capsules
  heavy duty anchor
  nylon anchor
  zamac anchor
 
Products Here:Home > Products

sleeve anchor
  • VIEW
  • INFORMATION
  • FAQ
  • A : use with the following base materials:
     Concrete Brick Block


    B : features of products

     • Anchor diameter equals hole diameter
     • Available in hex head and six other head styles
     • Available 1/4"-3/4" diameter up to 6-1/4" length
     • Zinc plated carbon steel and 304 stainless steel
     • Provides full 360 hole contact over large area and reduces concrete stress
     • Heavey-loading capacity
     • Pre assembled for faster,easier installations
     • Dynabolt can be installed through object to be fastened
     • Sleeve design improves holding power
     • No pre-spotting of holes necessary
     • Will work in any depth of hole
     

    C : how to use
    Installation Instructions
    Sleeve anchors can be installed in six easy steps. These concrete fasteners are pre-assembled to make installation quick and easy. A sleeve anchor has strong holding power and a heavy-loading capacity. Concrete anchors can be installed in brick, block, or concrete and work best in medium to heavy-duty capacities. This type of fastener can be used in any hole depth and pre-spotting is not necessary. Step by Step Anchor Installation Instructions follow:

    1. Drill hole same diameter as anchor diameter and 1/2 ” to 1’ deeper than expected embedment.

     

     

    2. Clean hole of all debris.
    3. Set the nut flush with the top of the sleeve anchor.
    4. Insert anchor through fixture into hole in base material until washer and nut are tight against the fixture.
     

    5. Turn nut until finger tight.

    6.Use wrench to set sleeve anchor by turning nut 3 to 4 full turns